A hardcore PC build needs not just the greatest hardware, but also a case big enough to house them all. If you want the most powerful system imaginable, you’ll need several GPUs, custom liquid cooling, and other high-end components that will take up much more room than a standard case.
You may even employ the most complex water-cooling setups with PC cases. They do, in fact, provide much more than you may expect. Although the look of these huge PC boxes isn’t subtle, they do contain high-end components.
That implies you’ll need the biggest, roomiest case you could find, but you’ll also want something attractive to show off your construction.
We’ve compiled a list of the best biggest PC cases available in 2022 to assist you in putting together your outrageous fantasy build.
Thermaltake Core W200
The Thermaltake Core W200 is the biggest case immediately available for private use and is totally customizable.
It’s close to what you’d need for commercial exploitation, thus it looks more like an IT cart than many other technically modest solutions. However, in terms of sheer size and strength, it is unrivaled.
The Core W200 is designed to handle a great deal of power, with enough space for two complete XL-ATX systems. In a domestic situation, you’d nearly find it difficult to find a need for this amount of redundancy. To get your money’s worth out of two perfectly decked XL-ATX or EATX rigs, you’d have to have been mining crypto while playing 144hz games.
If your budget is less than that, you’d be best off investing all of your budgets into cooling and the primary construction, with the secondary motherboard serving as a spare for streaming or background operations.
As previously said, the case is totally modular, enabling you to reorganize the area in various ways to accommodate any custom cooling, additional hard drive racks, or other modifications. The chassis can also be turned sideways, giving you extra choices for freeing up space around your workspace or letting heat escape from the top rather than the side.
There are racks on the side panel for installing up to two 600micrometers radiators if you select liquid cooling, which you should for an advanced, multi-motherboard setup. That’s a lot of radiator space, but it’s still less than what a case of this size and customization options might have. You can buy additional parts to modify and enhance that, but some of the cases on our collection come with almost twice as much by default.
This shell also comes with two separate I/O panels, each with four USB ports and a headset and mic connector. On the front panel, there is no USB-C port and no separate headphone jack. There’s also a front-facing LED strip that can be swapped out for some basic personalization.
In terms of quality, it is made of steel, which makes it somewhat heavier but considerably more durable. In light of this, the fact that the side panel is acrylic instead of the tempered glass seen in most models is a little surprising. Because it’s totally modular, you may choose between wheels and legs for the stand. When it comes to a case this huge and hefty, the legs are nearly always the preferable option.
Pros
- It’s a fully modular case with a lot of space.
- Massive storage and cooling capacity
- All sides have ventilation panels.
- Constructed with extreme sturdiness.
- There are several USB ports.
Cons
- Not ideal for displaying components or RGB.
- There isn’t as much water cooling capacity as there might be.
- Expensive.
Specifications
Form Factor | Super-Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX, XL-ATX |
Drive Bays | 3x 5.25” (accessible), 4x 2.5” or 3.5” (Behind the M/B tray), 10x 2.5” or 3.5” (HDD cage) |
Radiator Support | Up to 600 mm |
Pre-installed Fans | None |
Dimensions | 677 x 475 x 678 mm |
Weight | 28.9 kg / 63.7 lb |
I/O Ports | 8x USB 3.0, 2x HD Audio |
Corsair Obsidian Series 1000D
The Corsair Obsidian Series 1000D seems to be another chassis that can accommodate two machines, but it’s much more in keeping with what you’d expect from a dedicated gaming machine. Corsair established its reputation in intense computer gaming, so it’s no surprise.
That’s plenty for a fully equipped EATX build, a fallback mini-ITX build, two PSU, and, realistically speaking, appropriate coolant for virtually all systems. That’s a one-two punch that allows you to play games at ultra settings with 100+ frames per second while still allowing you to utilize the mini-ITX PC for streaming, online surfing, and other less demanding chores while taking resources away from your main computer.
This is also true if you’re planning on using it as a workstation. The dual motherboard capacity of the EATX architecture permits consumers to manipulate or analyze video while leaving the mini-ITX available to do other things, such as play some pretty high-quality video games.
Over a certain point, the challenge will be controlling the space rather than the total space. It doesn’t matter how much space you have if the majority of it is going to persist vacant in the center.
Multiple trays compartments are used in the Obsidian Series 1000D to accommodate all of the different components, including a center island for the EATX motherboard and power supply. In addition, the chassis incorporates foldable panels on both sides of the wall allowing easy access to all components, as well as a cable management compartment in the middle.
If you choose to remain with air conditioning, there’s enough room for up to Eighteen fans and lots of ventilation. However, until you go liquid-cooled, you won’t get the most from this case and the setup you put within it.
The case now includes a built RGB and fan control, which aids cable management by allowing you to route your fans and lights via that single control panel rather than having to perform additional wire management work.
Featuring 4 USB and 2 USB Type-C ports, two audio jacks, and a headset connector, the RGB-enabled front screen has enough area.
The sheer size of this casing, as well as the components within, are its major attractions. The structure of metal and smoky tempered glass is relatively simple, yet remarkable in its own right. The RGB is standard but may be turned off if that isn’t your taste. It’s only available in black.
Pros
- It’s large enough to store two complete PC setups.
- Extensive liquid cooling support.
- There’s plenty of space for cooling and storage.
- It has RGB capabilities.
- Cable management and compartment access are excellent.
- The design is lovely and beautiful.
- Exceptional quality.
Cons
- It might be difficult with limited supplies.
- The motherboard mount are a little too near to the PSU shroud.
- The cost is high.
Specifications
Form Factor | Super-Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX, SSI EEB |
Drive Bays | 6x 2.5”, 5x 3.5” |
Radiator Support | Up to 480 mm |
Pre-installed Fans | None, Only a Commander PRO controller for fans and lighting |
Dimensions | 697 x 307 x 693 mm |
Weight | 29.5 kg / 65 lb |
I/O Ports: | 4x USB 3.0, 2x USB 3.1 type-C, HD Audi |
Thermaltake Level 20
The Thermaltake Level 20 is unusual in that it features discrete, but visible chambers for the core architecture, the HDD rack, and, of course, the power supply. There was nothing incorrect with presenting them; they’re just not elements that are often shown. In most situations, the power supply is tucked away in a concealed sleeve or chamber. It’s also very compact for such a hefty container.
The main compartment additionally provides room for bespoke liquid cooling and can accommodate vertical GPU installation thanks to the inbuilt PCI-E connection. Furthermore, the motherboard compartment includes rack storage for up to 6 HDDs, whereas the second compartment at the front has cage storage for an initial 6 HDDs.
For the degree of horsepower that you can pack inside the case, the fan/radiator configuration isn’t as thorough as it might be. There are only 3 main areas for radiators: the front and rear of the chassis, as well as one between the HDD and motherboard compartments, which is securely in the center of the case and restricts the amount of heat it can exhaust.
A front radiator mount can take up to a 480micrometers radiator, the rear radiator mount could only hold up to 140micrometers, and the center radiator mount can only handle 360mm. Three 140micrometers RGB-capable case fans are also included with the case.
The Level 20’s design is built of metal, and it’s only obtainable in silvery with a movable tempered glass screen on the front of each compartment. The case features modular pieces, although they aren’t as easily dismantled as any of Thermaltake’s other products.
Because it’s a tall, substantial, and narrow chassis with pedals that really are barely 3 inches wide, you’ll like to lean it against a wall or perhaps the edge of your desk for further stability.
The enclosure comes with two RGB strips that may be configured together with the rest of your components. The front-facing I/O panel has four USB ports, one USB-C port, and the standard headphone and microphone connection.
Ultimately, the Thermaltake Level 20 is one of the largest, most distinctive, and high-quality computer cases available at the time. It caters to a highly segmented aesthetic. Furthermore, the case’s relative slimness makes it somewhat more room than other cases of this size.
Pros
- One-of-a-kind compartmentalized design.
- There’s a lot of room for components and storage.
- The structure is of high grade.
- high quality construction.
- Case fans and RGB components were included.
- All components are easily accessible.
- The sound isolation is excellent.
Cons
- Very expensive.
- Even for a case of this size, it’s rather heavy.
Specifications
Form Factor | Full Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX |
Drive Bays | 6x 3.5” or 2.5” (HDD cage), 2x 3.5” or 2.5” (HDD bracket) |
Radiator Support | Up to 480 mm |
Pre-installed Fans | 3x 140mm Thermaltake Riing Plus RGB |
Dimensions | 732 x 280 x 688 mm |
Weight | 32 kg / 70.5 lb |
I/O Ports | 1x USB 3.1 type-C, 4x USB 3.0, HD Audio |
Thermaltake View 91 RGB
The Thermaltake View 91 occupies an unusual position on our selection. It is smaller than the Thermaltake Tower 900 in terms of the actual technical specifications, but it is the XL ATX variant from the same range of cases. So, although having a somewhat smaller cubic space, it can often hold more components, including more powerful ones.
This case, like Tower 900, is large enough to fit custom liquid cooling according to a dual loop system, and it can be customized for standard or vertical GPU placement. Both side panels are made of tempered glass, which enables you to showcase off your core components as well as your cooling, but it renders cable management a little more difficult. There’s enough room for 12 HDDs in total, with six in a rack configuration and six in a cage format.
The case now comes with RGB components pre-installed, as well as four 140micrometers case fans. You can put up to ten 140micrometers case fans or twelve 120micrometers case fans if you just use air cooling.
You have the greatest room of any case on our shortlist if you’re opting for liquid cooling, which is almost a must for hardcore PC builds. Three radiators up to 480micrometers may be installed just on top, sides, and front, with one radiator up to 140micrometers on the rear and one up to 280micrometers on the bottom. There’s nothing you can throw at your Computer that this case won’t handle when fully loaded.
The top-mounted I/O panel has four USB ports, 1 USB-C port, and a headset and mic jack. In addition, the case is available in black or white.
This case, like Tower 900, features three tempered glass panels on the front, right, and left. The case’s side panels are hinged open for convenient access and run the length of the case. Apart from that, the case is made of totally modular steel, which means it can be dismantled completely or partly for repairs, replacements, and simple access to all sections of your PC’s interior.
Ultimately, if you’re looking for a big case, the View 91 has all you need: it’s high-quality, capacious, and it looks and works well. The compatibility for XL ATX motherboards and the ability to cool the amount of power you’d be putting around it is the case’s primary selling points. Not quite as ideal for showcasing as some other possibilities, but if you’re looking for a way to achieve both that amount of strength and do a little showing off, this is the place to go.
Pros
- Full display possibilities in an XL ATX enclosure.
- Inside, there is a lot of room.
- Excellent thermal performance
- Cooling capacity in the tens of thousands of tons.
- The construction quality is excellent.
- Two case fans are already fitted.
- Design without the use of any tools.
- The system is completely modular.
Cons
- With a fully modular design, there’s more room for bent pieces.
- If you’re not going for an XL ATX construction, this may not be the best pick.
Specifications
Form Factor | Super Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX, XL-ATX |
Drive Bays | 12x 2.5” or 3.5” (HDD cage) |
Radiator Support | Up to 480mm |
Pre-installed Fans | 4x 140mm Thermaltake Riing Plus RGB |
Dimensions | 691 x 344 x 645 mm |
Weight | 26.8 kg / 59 lb |
I/O Ports | 1x USB 3.1 type-C, 4x USB 3.0, HD Audio |
Thermaltake Tower 900 Black Edition
The idea of having an advanced liquid-cooled system is to have unrivaled gaming performance, but let’s be real, showing off is also a large part of it. The Thermaltake Tower 900 is designed to be a show-stopper. It stands about 2.5 feet tall and features toughened glass on 3 sides, thereby turning it into showcase components for your computer.
It is structured for vertical GPU attachment of many linked GPUs to get the most of the form and space. There are 9 hard drive bays in total, with six 3.5″ or 2.5″ drives in the cage on the outside, two 2.5″ drives on the inside, and one 5.25″ drive in the bottom front.
There’s plenty of space to display a custom liquid cooling configuration, considering twin loop installations. It also boasts the most spacious radiator mounts of any case on our list, with enough for two 560micrometers radiators. The case also has 2 case blowers, which are meant to suck air up from the bottom of the case, optimizing the vertical configuration’s cooling capacity.
There have been no RGB components in the enclosure, regrettably. On the I/O panel, there really are additionally four USB ports , as well as regular earbuds and microphone connections. There are two color options for the case: black and white.
The casing is made entirely of steel and tempered glass, and it is totally modular. All of this can be taken apart and replaced, even down to the chassis. The legs provide plenty of space from the desk or the ground, and their tapering shape gives the case a shaky appearance, although they are absolutely safe.
To summarize, the Thermaltake Tower 900 is a fantastic choice for big PC cases with display capabilities. You’ll be difficult to find something better (or larger) in this price bracket with so much dedicated space inside, such high-quality craftsmanship, and such cheap pricing. It may need a little more room and forethought than some of the other items on our list, but it will be well worth it once everything is up and running.
Pros
- The vertical case is ideal for displaying cooling.
- Construction of high grade.
- Purely practical case.
- Case fan and huge radiator mounts were included.
- There are a number of HDD slots with hot-swapping capability.
- PSU and cables are kept in the back compartment.
- Affordable price.
Cons
- There’s nowhere to go if things don’t go as planned.
Specifications
Form Factor | Full Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX |
Drive Bays | 1x 5.25” (accessible), 2x 2.5”y (with HDD tray), 6x 2.5” or 3.5” (with HDD cage) |
Radiator Support | Up to 560mm |
Pre-installed Fans | 2x 140mm Turbo Fans |
Dimensions | 752 x 423 x 483 mm |
Weight | 24.5 kg / 54 lb |
I/O Ports | 4x USB 3.0, HD Audio |
Thermaltake AH T600
If Thermaltake’s earlier submission seemed to be rather like an IT cart, this case appears to have taken a sharp turn in the other way. While we would have accepted “Storm Warrior headgear” or “Brave Omnimech,” it labels itself an “aircraft type” case. It’s one of the more stylish cases available this year, but it’s unlikely to appeal to everyone.
It’s indeed, however, big enough to contain a whole EATX board as well as all of the parts you might connect to it. The motherboard is mounted on a center island, which makes showing creative cooling and RGB a lot simpler, but it also makes cable management a top focus.
This case is already very well circulated due to its design. Large gaps between the tempered glass panels, channels in other locations, and the relatively close absence of a backing plate all mean you can obtain a maximum airflow with fewer and/or less expensive fans, which is excellent considering it will only take 10 case fans if you want to choose for solely air cooling.
When it comes to liquid cooling, the case truly shines. Up to three radiators may be installed, each measuring 360mm on the top and side and 480mm on the front.
However, the case itself has no RGB components, and there is no method to address your RGB components from the outside. The I/O panel includes 3 USB ports, 1 USB-C port, and normal headset and mic jacks, and the casing.
The build quality is largely steel and tempered glass, although there are more plastic pieces than we usually like to see in a build. When adding or repairing components, the exterior is nearly fully modular, giving you more area to work.
The Thermaltake TH600 is a stunning case that isn’t nearly as large as it seems. Due to the obvious open case design, you save some room that otherwise would have been needed for fans and cooling, which balances the fact that it is smaller on the inside. If this is the case, you obviously knew it when you had enough and are only double-checking that it would suit your construction, which it should.
Pros
- The design is eye-catching.
- The build quality is excellent.
- There is a lot of airflow and ventilation.
- There’s enough room for bespoke liquid cooling.
- Interior access is simple.
- There are three color choices to choose from.
Cons
- There isn’t as much storage space as there used to be.
- The open casing allows dust and debris to enter more easily.
- It takes up more room than cases with comparable capacities.
Specifications
Form Factor | Full Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX |
Drive Bays | 3x 2.5” or 2x 3.5” (accessible) |
Radiator Support | Up to 480 mm |
Pre-installed Fans | None |
Dimensions | 628 x 337 x 763 mm |
Weight | 20.6 kg / 45.5 lb |
I/O Ports | 1x USB 3.1 type-C, 2x USB 3.0, 1x USB 2.0, HD Audio |
Cooler Master Cosmos C700M
In a design that screams space-age power, the Cooler Master Cosmos C700M seems to be both hefty and elegant at the same time. The curved tempered glass panel enables you to display elements, however, the bezel around at the edge gives it the appearance of a porthole rather than a display.
Aside from that, bespoke liquid cooling is fully supported, and there’s a little compartment underneath the motherboard for better cable management. Because this is the only case on our list without integrated HDD slots or racks, you’ll have to make do with the memory on your board or invest in additional external storage.
The chassis comes with 4 140micrometer PWM fans installed for cooling assistance. You’ll probably want to replace these when you finish your setup because they’re on the pricier side and don’t have RGB.
Irrespective of whether you use 120micrometers or 140micrometers fans, the case can handle a total of 9 fans. Three people may sit at the front, three at the top, 2 at the bottom, and one in the back. This almost equates to the very same amount of thermal area.
The casing is made out of aluminum and has a tempered glass side panel. It’s available in black or brushed metal. Because the feet are situated wider, this case is much more stable than you’d anticipate given its height and breadth.
The top of the case is also shaped into handles for easy transportation, although the case weighs in at over 50 pounds without liquid cooling, and the inclusion of all additional components would almost treble that. The handles are basically there to help you put your final construction in place and adjust the case once you’ve finished working on it.
2 programmable RGB strips run along the front of the chassis, but no extra RGB components are preinstalled. Finally, there are 4 USB ports, a USB-C port, and headset and mic jacks on the I/O panel.
There isn’t anything that distinguishes this case from the other Thermaltake cases in the same line. Simply said, this appeals to a distinct aesthetic. Thermaltake cases are known for allowing parts to stand alone, but with this one, you get a necessarily influenced that still lets you show off your components, although to a reduced extent.
Pros
- Aluminum structure for sturdiness.
- There’s enough room for complete E-ATX support and lots of cooling.
- ARGB elements were included.
- The room is well ventilated.
- There’s enough room for a 420mm radiator.
- The aesthetics are stunning.
Cons
- The handles are much too hefty to be functional.
- Fans who are included are treated as an afterthought.
- Pricey.
Specifications
Form Factor | Full Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX |
Drive Bays | 1x 5.25”, 4+1x 2.5”/3.5” combo |
Radiator Support | Up to 420 mm |
Pre-installed Fans | 4x 140mm PWM fans |
Dimensions | 650 x 306 x 651 mm |
Weight | 23.8 kg / 52.5 lb |
I/O Ports | 1x USB 3.1 type-C, 4x USB 3.0, HD Audio |
Thermaltake Core P8
That not everyone who views your combat station will be familiar with the specifications or all of the components in use.
The vast majority of people realize one thing regarding extreme gaming PC: they need a large number of fans. It’s one of those situations when people will say, “Well, that was a lot of supporters.” It’s evident that this would be a case that is attempting to keep things calm.
With whole plate tempered glass windows on the front, side, and top, that case really sticks out so it allows you seeing every fan that’s functioning to cool your Computer. Every front, side, top, and bottom panel supports four 120mm fans (16 total), as well as three 140micrometers fans (12 maximum) and two more on the back panel.
For the cooling system, you may use a 480mm radiator on the front and right side, a 360mm radiator on the top, a 240micrometers reservoir on the bottom, and a 120micrometers radiator on the back.
The tempered glass panels may be detached if desired, enabling this case to work as an open case. It has the appropriate certification to operate as an active investigation; it’s not a matter of pulling panels it should remain in place during operation.
In combination with the headset and microphone jacks, the I/O panel has Four USB ports and 1 USB-C slot.
The Core P8 is one of the better cases to consider if you’re so much about the RGB and showing off your setup. There are plenty of areas to display up to 18 RGB blades or a custom liquid cooling system, as well as any other RGB components you choose to add. More significantly, the case is large enough to accommodate almost any design and will seem strong even to those unfamiliar with PC construction.
Pros
- Aluminum structure for sturdiness.
- There’s enough room for a complete E-ATX setup and lots of cooling.
- ARGB elements were included.
- The room is well ventilated.
- There’s enough room for a 420mm radiator.
- The aesthetics are stunning.
Cons
- The handles are much too hefty to be functional.
- Fans who are included are treated as an afterthought.
- Pricey.
Specifications
Form Factor | Full Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX |
Drive Bays | 3x 3.5”, 6x 2.5” |
Radiator Support | Up to 480 mm |
Pre-installed Fans | None |
Dimensions | 660 x 260 x 626 mm |
Weight | 22.6 kg / 49.8 lb |
I/O Ports | 1x USB 3.1 type-C, 2x USB 3.0, 2x USB 2.0, HD Audio |
Antec Torque
You can know you’re looking at something exceptional once you’ve seen the Antec Torque; it simply takes a minute to comprehend what it is. It’s an open casing, similar to the AH T600’s “helicopter design,” but this one looks like a cross between such a power drill and a bioinformatics helmet in the nicest manner conceivable.
In addition, because of the case’s intuitive design, the radiators are exposed to considerably more air than they would have been in a closed area. That’s probably for the best, considering this case can only fit two 360micrometers radiators, one in front and one on top.
Although there is only enough room for six 120micrometers fans, the airy design reduces the need for nearly half of them. It works with vertical gpu mount, however, the accompanying PCI-E connection is from the prior generation, so keep that in mind if you have one of the latest GPUs.
The casing is made of machined aluminum and tempered glass, and it comes in two colors: red and black and white and black. It’s very light, weighing a little under 20 pounds. Furthermore, the case isn’t equipped with a grip, and unsecured cases are difficult to travel.
However, it does not come with any fans or RGB components fitted, and the I/O panel is less than ideal, with just two USB ports and one USB-C connector in addition to the headphones and mic connections.
Overall, if you’re searching for something unique, the Antec Torque is a good choice. Generally, it’s a huge case, but it isn’t as roomy as the majority of the cases in our category. However, since it’s a very compatible case that’s well-matched to liquid cooling, it’s a wonderful opportunity to illustrate your build in a case that’d be suitable for an ITX build.
Pros
- Design that is both stylish and well-engineered.
- The use of an open casing reduces the amount of power and money spent on cooling supplies.
- E-ATX motherboards are supported.
- There’s enough room for bespoke liquid cooling.
- The structure is of high grade.
Cons
- Parts may be exposed to dust due to the open casing.
- There are no admirers of this character.
- There are just two drives available.
- Pricey.
Specifications
Form Factor | Mid Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX |
Drive Bays | 1x 2.5”, 1x 3.5” |
Radiator Support | Up to 360 mm |
Pre-installed Fans | None |
Dimensions | 644 x 285 x 621 mm |
Weight | 14.3 kg / 31.5 lb |
I/O Ports | 1x USB 3.1 type-C, 2x USB 3.0, HD Audio |
Nanoxia Deep Silence 6
The Nanoxia Deep Silence 6 doesn’t seem to be that impressive. There are no glass panels to show off your work. It’s merely a practical situation. Even liquid-cooled computers, powerful computers may be noisy. The Deep Silence is strengthened and insulated in such a manner that it can still vent heat while reducing noise from your computer.
It’s now set up for either air cooling, albeit you won’t be able to demonstrate off either. That means you’ll be able to save money on RGB. It includes room for a 360micrometers radiator at the front and a 140micrometers radiator in the back for air cooling.
With a total of 12 fans and some rather stringent needs, you have a lot more possibilities for air cooling. Only 140micrometers fans may be used in the front and rear . With room for three on top and 2 on the bottom, the top and bottom accept either 120micrometers or 140micrometers.
Two 120mm or 140mm fans may be placed on each of the right and left sides. The case, on the other hand, comes with 5 fans already mounted. A separate chimney is used to expel the majority of the air.
In terms of style, the casing is made entirely of steel and comes in just one color: black. The I/O panel features six USB ports in total, none of these are USB-C, as well as the standard headset and microphone connectors.
Altogether, the Nanoxia Deep Silence 6 is a big, roomy case that can accommodate any set up and effectively separate it. This is a tower built for a workstation more than any other case on our list. PC Gamer will have headphones or speaker systems installed, allowing them to avoid or drowned out the noise of their computer. This case may be a lifesaver if you spend more time working at your computer while it is running at high settings.
Pros
- Engineering for noise reduction.
- The hybrid cooling capacity is impressive.
- There’s plenty of room for components if they’re fitted properly.
- There are five 140mm fans included.
- Inside is a large case with plenty of space.
Cons
- There’s no way to flaunt your physique.
- The design is quite simple.
- It’s tough to locate in stock because of the low manufacturing rate.
Specifications
Form Factor | Super Tower |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX, XL-ATX, HPTX |
Drive Bays | 10x 2.5”/3.5”, 6x 2.5” |
Radiator Support | Up to 360 mm |
Pre-installed Fans | 5x Deep Silence 140mm fans |
Dimensions | 644 x 250 x 655 mm |
Weight | 20.8 kg / 46 lb |
I/O Ports | 4x USB 3.0, 2x USB 2.0, HD Audio |
Conclusion
Each case on our collection has enough space for all the greatest powerful features you’ll need to PC building strong for gaming PC. The first question to ask yourself is whether you want a backup to avoid performance drops when streaming or multitasking. It’s simply a matter of deciding how much cooling capacity you’ll need and how you’ll display your design after you’ve made that decision.
Having a strong PC is satisfying both in terms of what you can do with it and in terms of witnessing the parts you’ve put together perform in unison with the RGB components you’ve installed and coded.
Quick Shopping Tips for the Best Biggest PC Cases
PC cases are one of the most critical components of your computer, which is why selecting the appropriate one is so vital. There is a range of sizes and varieties to choose from, as well as a variety of features to meet your needs. All of these things will be discussed in-depth further down!
Modular Design
Computer wires are one of the most inconvenient aspects of any design. If not arranged correctly, they may get in the way, annoy you, and make your PC appear like a jumbled mess. Fortunately, certain solutions to this issue are now standard in modern cases, such as cable management facilities on either side or beneath the motherboard tray, which keep cables concealed at first appearance but accessible when required.
Front Panel
When it comes to the front panels of PC cases, there is a lot of variety. Headphone jacks, mic jacks, USB ports, and other sorts of connections are commonly found here. Depending on how many devices need access to these characteristics, you may locate two or many more in-case plugs rather than spending time determining which ones are of the highest quality.
Clearance
You would believe that since the components are all plug-and-play, you don’t have to worry about whether your new PC will fit together, but there’s more to it than meets the eye. It is crucial for each component in certain circumstances, such as aftermarket air coolers or higher-end graphics cards, which may be longer owing to size and length limitations. The clearance height between expansion slots on motherboards, in particular, is sufficient for them to function effectively in a case.
Case Dimensions
A lot of people ask us about computer case sizes. Big Tower (Large), Mid-Tower (Medium), Micro-ATX (Small), and Mini ITX are the four primary varieties, which are classified by size (smaller). The Extended ATX motherboard is the most common form factor because it can accommodate more powerful components like as graphics cards with bigger heatsinks. Standard ATX motherboards will be restricted to 144mm at the same time.
Frequently Asked Questions
Is a larger PC case preferable to a standard one?
Yes, larger PC cases are superior to standard cases in terms of cooling, optical drive capacity, and a hard drive bay. It is also simpler to troubleshoot the equipment and properly control the wire.
Is it true that full tower PC cases provide greater airflow?
Full or big PC cases may hold hardware for a variety of applications, including water or liquid cooling. Furthermore, complete tower cases provide enough area for up to 12 fans, resulting in improved ventilation. Full tower cases provide superior ventilation in this situation.